Adhesive floor tiles, Grey, 20 kg

91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance). ✅ Key Features & Benefits Easy to use — just mix with water (no complex preparations). Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). Economical & smooth consistency — because it's single-component and just water-mixed, it's cost-effective and easy for tilers to handle. Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). �� Typical Applications Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. Small- to medium-sized ceramic / vitrified tile installations Cement mortar bed floors, cement plaster walls, concrete surfaces Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) �� Product & Packaging Info Available in 20 kg and 50 kg bags. Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). If you want — I can draft 2 versions of this description for you: A short marketing-style blurb (for catalogue or brochure) A detailed specification sheet (for technical document or client use)