Ardex Endura Heavy Duty Tile Cleaner (500ml)

A powerful, heavy duty, acid – based cleaner for ceramic tiled floors and walls. HEAVY DUTY TILE CLEANER is designed for removal of cement film residues, efflorescence and most oxide stains. It may also be used as general purpose cleaner on other acid resistant surface.Note: Do not use on surfaces that are not resistant to acid such as marble/terrazzo.Features:Powerful formulaFast actingEasy to applyRemoves cement filmRemoves residues, efflorescence and most oxide stainsInstructions for use:Dilute to the correct ratios as required: Light cleaning on glazed and unglazed tiles, bricks, slate, stones and quarry tiles use 1 part HEAVY DUTY TILE CLEANER to 4 parts clean water. Heavily soiled areas may require an undiluted solution to be applied Note: Always test initially on a small inconspicuous area. Dilution ratio may be increased or decreased as per nature of stone/substrate.Liberally apply the solution to the floor area to be cleaned. Leave in contact with the area approx. 1-2 minutes. Using a stiff bristled brush or a scouring pad, thoroughly scrub the area treated with the solution.Mop up the solution and rinse well with water up to 3 - 4 times until all traces of the solution have been removed.Heavily soiled areas may require subsequent applications of HEAVY DUTY TILE CLEANERDo not use on new areas until the adhesive and grout are fully curedImmediately clean accidental spillages by washing thoroughly with plenty of water. Limitation:May discolour tiles/stones not resistant to acid.Not effective against acrylic/solvent stainsDo not use on highly porous stone/tiles that are not resistant to acidPrecautions:Keep out of reach of children. Wear suitable protective clothing, gloves and eyes/face protection. After contact with skin, wash immediately with plenty of clean water. In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice