NCl Cerosstik-T1 103 Tile adhesive

91 000 74051 NCL CEROSTIK TI-103 is a cement-based, polymer-modified thin-bed tile adhesive. It's a pre-mixed dry powder adhesive: you just add water on site, mix and apply — no need for custom cement-sand mixes. It conforms to standard: IS 15477:2019 (Type 1) and also meets EN 12004 classification C1T. �� Technical Specs & Suitable Use Spec / ParameterDetail Tile type suited Small-format clay & ceramic tiles; works also for small-size vitrified tiles. Substrate types Cement plastered walls/floors, cement concrete surfaces, cement screed. Bed thickness (adhesive thickness) 3 mm – 10 mm. Coverage ~ 0.278 m² per kg (with 6 mm × 6 mm notch trowel). Packaging Usually 20 kg bags; some sources mention also 50 kg. Use area Internal walls & floors; can also be used for external covered areas with small-format tiles (within limits) per manufacturer. Other traits Polymer-modified, self-curing, relatively low-VOC compared to some adhesives. ✅ What It's Good For Installing ceramic/clay tiles in interior rooms — walls or floors. Good for bathrooms, kitchens, living areas (provided tiles suit). Jobs where you want a ready-mix adhesive (less site-work compared to cement-sand mortar), to save labour and get consistent quality. Projects where smaller tiles or standard-format tiles are used — since TI-103 is meant for small/medium tiles rather than heavy or large-format stone/tiles. Surfaces like cement plaster, concrete, screed, existing mortar beds — typical for Indian residential/commercial internal tiling. ⚠️ What to Consider / Where It May Not Be Ideal Not ideal for large-format tiles, heavy stone (granite/marble), or heavy-duty outdoor tiling — the product is meant for small/medium ceramic/clay tiles. For exterior or damp/wet exposed areas (like open terraces, pool-sides, heavy moisture zones) — unless conditions are controlled and tiles are small — better to use heavier-duty adhesive. As with any adhesive: substrate must be clean, level, dry, and free from dust/oil/loose plaster/paint before application. This ensures adhesion strength and durability.