VBOND VEPOXY SP GOLD - 2K GROUT, 5 kg

91 000 74051 VEPOXY SP GOLD is a two-component (resin + hardener + filler-powder) epoxy tile grout for grouting tile joints — i.e. filling the gaps between tiles, not for sticking tiles to floor/wall. It's meant for ceramic tiles, vitrified tiles, natural stone (marble/granite), glass-mosaic, and other tile/stone surfaces. Target use: areas where hygiene, water-resistance, stain-resistance and durability matter — kitchens, bathrooms, swimming pools, hospitals, restaurants, heavy-traffic floors and wet/water-exposed surfaces. �� Technical Specs & Properties Property / FeatureSpecification / Benefit Suitable joint width 0–6 mm grout joints Water absorption < 0.5% Compressive strength > 50 MPa Shrinkage / cracking / powdering Non-shrinkage, non-cracking, non-powdering finish Chemical / acid / alkali resistance Water resistance & stain resistance Yes — good for wet / stain-prone areas Antifungal and antibacterial Yes — helps hygiene & prevents mould / fungus in damp areas Pot life (working time) ~ 40–45 minutes after mixing Foot traffic allowed after ~ 24 hours Available colours Common: White, Black, Ivory. Custom colours possible on demand. Packaging 2 kg and 5 kg pails / buckets. Shelf life (sealed) 24 months if stored in a cool, dry place. ✅ Advantages & When You Should Use It Use VEPOXY SP GOLD when you need: Durable grout joints — for high-traffic floors, commercial kitchens, pool decks, bathrooms, etc. Because it's epoxy-based it's more durable than regular cement-based grout. Waterproof, stain-proof & hygienic finish — good for kitchens, bathrooms, hospitals, restaurants, swimming pools or any wet / hygiene-sensitive area. Strong chemical, acid, alkali resistance — useful where cleaning chemicals, detergents, grease, or moisture are frequent. Minimal maintenance & long life — thanks to non-shrinking, non-cracking, anti-fungal, stain-resistant and water-resistant properties. Vertical or horizontal surfaces — clings well to vertical surfaces too, so usable for wall tiles as well as floors. ⚠️ How to Use — Important Considerations Ensure tiles & joints are clean, dry and free of dust/debris before grouting. Mix properly: combine resin (Part A), hardener (Part B) and filler (Part C) thoroughly. Use a low-speed stirrer to avoid overheating (which reduces pot life). Work the mixed grout within 40–45 min (pot-life), finish grouting, and clean off excess grout from tile surfaces before it starts to set. Avoid leaving excess grout on tile surface as it may cure to hard film — clean off promptly with sponge / float. Allow full curing / drying before exposing to heavy traffic or water — generally 24 hrs for foot-traffic safe, but full chemical / water-resistance likely needs curing as per instructions.